Guide for Setting Up Leva Plus Tents

For a quick and easy tent setup, the process is as follows.

1. Site selection.

Choosing a location to pitch our camping tent is very important to decide When we choose to set up a tent, we should choose a spacious and flat ground.

2. Prepare all the accessories for the tent.

Tent packaging generally includes ground nails, tent center poles, inner tents, wind ropes, etc. First of all, carefully read the information in the manual. We should at least know what these accessories do.

3. Spread the tent evenly on the ground.

Remove your camping tent from the storage bag and spread out evenly. Some tents may require you to set up an internal tent first. All corners should be evenly distributed, and the outer tent should be flat. This will make you more balanced after standing.

4. Fix several ground nails.

Fix a few ground pegs first to make sure you can support the tent with the center pole, and then adjust the ground pegs later.

5. Insert the center rod.

The center pole supports your tent. The length of the center pole is closely related to the height of the tent. The center pole provides access to the tent from the tent door and supports the top of the center pole on top of the tent.

6. Adjust the fixing point of the ground pegs.

After using the center pole to support the tent, it is necessary to adjust the fixing points of the tent pegs, not too loose or too tight. Generally speaking, the fixed point of change can be adjusted. When we installed it for the first time, we could slide the switch of the mounting point to the maximum, which accommodated a better change in the pull point of the camping tent.

7. Join the inner tent.

Inner tent In winter camping, most people will choose to add an inner tent to their tent. In cold weather, it is best to install an inner tent. First, the inner tent provides a protected sleeping place away from the ground, preventing mosquitoes from entering the tent.